Downloads
- Product Cut SheetETP-100EB Cutsheet.pdf
- A&E SpecificationsETP-100EB_AE.rtf
- Product ManualEmergency Phone Manual.pdf
- Dimensional DrawingETP-100EB_Rev_1_0_10062010.DXFETP-100EB_Rev_1_0_10062010.DWG
Flush Mount Emergency Phone
Model Number: ETP-100EBV
The ETP-100EBV Flush Mount Emergency Phone is an indoor, ADA-compliant hands-free device that includes the capability to record a message identifying the location of the call.
The ETP-100EBV is available in versions that can replace call boxes made by virtually any other manufacturer.
Talk-A-Phone's ETP-100EBV Flush Mount Emergency Phone with Voice Identifier is phone line powered and can be used on a POTS line, PBX extension, or with an EC-8 Emergency Phone Consolidator.
Flush Mount Emergency Phones are often used in locations such as: elevators, areas of rescue, stairwells, indoor controlled-access areas, senior citizen housing and correctional facilities.
- Auto-answer allows security to monitor and initiate calls with Emergency Phone
- Vandal-resistant stainless steel faceplate & metal button
- Uses regular phone lines or PBX
- Phone line-powered: no power supply or battery back-up required
- Push button once to call, then speak hands-free
- Options available that offer the ability to automatically identify attendant of location of calling phone by recorded message and digital display
- LED indicator for hearing impaired
- Cast metal raised letter and Braille signage for ADA compliance
- Built-in autodialer can call two numbers. If first number doesn't answer or is busy, dials second number
- Automatically inform the attendant of emergency phone location via recorded message
| Phone Line: | Requires POTS line, analog PBX extension, or connection to one of our consolidators. For consolidator information, see Talk-A-Phone models EC-2 or EC-8. |
| Construction: | 12 gauge #4 brushed stainless steel face plate |
| Dimensions: | Front panel: 9.5"W x 11.75"H Wall opening: 4.5"W x 7.5"H x 2.0"D |
| Weight: | 6 lbs (2.7kg) |
| Mounting: | Flush mounts (Model MS-400 backbox available) |
| Communication: | 2-way hands-free communication |
| Power Source: | Phone line powered (requires 20mA at 24V off-hook) |
| Programming: | Non-volatile EEPROM programming can be done from any telephone. No battery back-up is needed |
| "On" Time: | Programmable from 1-4270 minutes |
| Wiring: | 1 twisted-shielded pair (gauge depends on distance) |
| Connection: | Parallel tip and ring connected to RJ11 connector for quick installation |
| Circuit Protection: | Varistor lightening suppressed and full wave polarity guarded |
| Dialing Speed: | Approximately 10 tones per second |
| Digit Capacity: | Up to 18 digits, including pauses, for each of two phone numbers |
All Prices and Specifications Subject to Change Without Notice
