
SIP PBX for up to 500 IP Call Stations with Support for PSTN/SIP Trunks
- Use Voice over IP to communicate over LAN/WAN
- Supports up to 500 SIP endpoints (i.e. call stations and attendant desk phones)
- Supports up to 45 concurrent SIP phone calls
- Four (4) built-in analog PSTN line ports (FXO) for up to four (4) concurrent off-site calls
The PBX-GS-6204 Phone System is designed to accommodate Talkaphone’s VOIP-200, VOIP-500, and VOIP-600 Series IP Call Stations. Versatile and robust, this full-featured PBBS System provides a complete head-end solution.
- Use Voice over IP to communicate over LAN/WAN
- Supports up to 500 SIP endpoints (i.e. call stations and attendant desk phones)
- Supports up to 45 concurrent SIP phone calls
- Four (4) built-in analog PSTN line ports (FXO) for up to four (4) concurrent off-site calls
- Strongest-possible security protection using SRTP, TLS and HTTPS encryption
- Dual Gigabit network ports with integrated PoE+
- Supports up to a 5-level IVR (Interactive Voice Response)
- Built-in call recording server; recordings accessed via web user interface
- Supports call queue for efficient call volume management
- Use Voice over IP to communicate over LAN/WAN
- Supports up to 500 SIP endpoints (i.e. call stations and attendant desk phones)
- Supports up to 45 concurrent SIP phone calls
- Four (4) built-in analog PSTN line ports (FXO) for up to four (4) concurrent off-site calls
The PBX-GS-6204 Phone System is designed to accommodate Talkaphone’s VOIP-200, VOIP-500, and VOIP-600 Series IP Call Stations. Versatile and robust, this full-featured PBBS System provides a complete head-end solution.
- Use Voice over IP to communicate over LAN/WAN
- Supports up to 500 SIP endpoints (i.e. call stations and attendant desk phones)
- Supports up to 45 concurrent SIP phone calls
- Four (4) built-in analog PSTN line ports (FXO) for up to four (4) concurrent off-site calls
- Strongest-possible security protection using SRTP, TLS and HTTPS encryption
- Dual Gigabit network ports with integrated PoE+
- Supports up to a 5-level IVR (Interactive Voice Response)
- Built-in call recording server; recordings accessed via web user interface
- Supports call queue for efficient call volume management

4G LTE Cellular Interface (Verizon Network) for Analog Call Stations
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly

Single-Port Power over Ethernet (PoE) Midspan Extractor
- Outputs 12VDC up to a maximum of 25W of power to a non-PoE device from a 30W, IEEE 802.3at PoE source
- RJ45 connectors for data input and output
- Two (2) terminal strips for DC output and power level selection
- Selectable for 13W or 25W output
- Requires an IEEE 802.3at Ethernet switch (provided by others) with ports supporting a minimum output power of 30W
Talkaphone’s POE-MID-EXT-1 Single-Port Power over Ethernet (PoE) Midspan Extractor is designed to provide power to an ETP-EL12/24 Blue Light and/or an LED Panel Light (P/N 68590) via a 30W, IEEE 802.3at network connection.
- Outputs 12VDC up to a maximum of 25W of power to a non-PoE device from a 30W, IEEE 802.3at PoE source
- RJ45 connectors for data input and output
- Two (2) terminal strips for DC output and power level selection
- Selectable for 13W or 25W output
- Requires an IEEE 802.3at Ethernet switch (provided by others) with ports supporting a minimum output power of 30W
- Outputs 12VDC up to a maximum of 25W of power to a non-PoE device from a 30W, IEEE 802.3at PoE source
- RJ45 connectors for data input and output
- Two (2) terminal strips for DC output and power level selection
- Selectable for 13W or 25W output
- Requires an IEEE 802.3at Ethernet switch (provided by others) with ports supporting a minimum output power of 30W
Talkaphone’s POE-MID-EXT-1 Single-Port Power over Ethernet (PoE) Midspan Extractor is designed to provide power to an ETP-EL12/24 Blue Light and/or an LED Panel Light (P/N 68590) via a 30W, IEEE 802.3at network connection.
- Outputs 12VDC up to a maximum of 25W of power to a non-PoE device from a 30W, IEEE 802.3at PoE source
- RJ45 connectors for data input and output
- Two (2) terminal strips for DC output and power level selection
- Selectable for 13W or 25W output
- Requires an IEEE 802.3at Ethernet switch (provided by others) with ports supporting a minimum output power of 30W

4G LTE Cellular Interface (GSM Networks) for Analog Call Stations
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or
- ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
ETP-CI-4G-GSM Cellular Interface transforms any Talkaphone ETP-110 or ETP-500 Series Analog Call Station from wired landline device into a 4G LTE cellular voice-enabled device
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or
- ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly
ETP-CI-4G-GSM Cellular Interface transforms any Talkaphone ETP-110 or ETP-500 Series Analog Call Station from wired landline device into a 4G LTE cellular voice-enabled device
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station
- Rugged aluminum enclosure
- Includes a MIMO antenna (two for cellular/LTE and one for GPS) with 17-foot cable assembly

Dual Camera Extension for OP4 Camera Arm
This add-on crossbar easily fits any existing Talkaphone tower arm. Simply detach your current camera from your existing tower arm, and secure the new OP4-EXT into the originally provided threading. Allowing users to then attach dual cameras on top of their tower, doubling the amount of surveillance.
- Extension to OP4 for use with two (2) cameras
- Compatible with MT, MTE, and MT/R Series
- Country of Origin USA
- ECCN EAR99
This add-on crossbar easily fits any existing Talkaphone tower arm. Simply detach your current camera from your existing tower arm, and secure the new OP4-EXT into the originally provided threading. Allowing users to then attach dual cameras on top of their tower, doubling the amount of surveillance.
- Extension to OP4 for use with two (2) cameras
- Compatible with MT, MTE, and MT/R Series
- Country of Origin USA
- ECCN EAR99

Power Charging System (42 Ah)
Power Charging Systems allow emergency phone towers to be powered from a switched power supply.
- System will operate for 23.5 hours in standby and 0.5 hours in active operation
- A minimum charge time of 14 hours per day is required in winter and 8 hours per day in summer
- System must not drop below -22ºF in peak of winter or 50ºF in peak of summer
- Systems are designed to be connected to a power grid that is switched on at night year-round
Power Charging Systems allow emergency phone towers to be powered from a switched power supply.
- System will operate for 23.5 hours in standby and 0.5 hours in active operation
- A minimum charge time of 14 hours per day is required in winter and 8 hours per day in summer
- System must not drop below -22ºF in peak of winter or 50ºF in peak of summer
- Systems are designed to be connected to a power grid that is switched on at night year-round

Power Supply (24VDC,1A)
Talkaphone’s 86354 Power Supply (24VDC 1A) works with Talkaphone’s VOIP-500 Series Emergency Phones, WEBS-CM-2 Communications Module, WEBS-PA-1 Indoor Area Paging Unit and ETP-EL12/24 LED Blue Light.
Talkaphone’s 86354 Power Supply (24VDC 1A) works with Talkaphone’s VOIP-500 Series Emergency Phones, WEBS-CM-2 Communications Module, WEBS-PA-1 Indoor Area Paging Unit and ETP-EL12/24 LED Blue Light.

Base Station for Talk-A-Lert®
Base station automatically displays a 6-digit identification code for any Talkaphone 100-Series or 400-Series Emergency Phone. Base station functions as a standalone unit but also works in conjunction with Talk-A-Lert (Model ETP-TAL) to log and manage incoming calls.
- Uniquely identify calling ETP-110 and ETP-500 Series Analog Call Stations from any attendant telephone connected with an EB-300 Base Station
- Indicates whether call was initiated by pushing button or by an auxiliary device, as well as which button of a 2-button phone initiated a call
- Built-in serial port for connection to a PC running Talk-A-Lert (Model ETP-TAL)
- Stores real time and date for processing
Base station automatically displays a 6-digit identification code for any Talkaphone 100-Series or 400-Series Emergency Phone. Base station functions as a standalone unit but also works in conjunction with Talk-A-Lert (Model ETP-TAL) to log and manage incoming calls.
- Uniquely identify calling ETP-110 and ETP-500 Series Analog Call Stations from any attendant telephone connected with an EB-300 Base Station
- Indicates whether call was initiated by pushing button or by an auxiliary device, as well as which button of a 2-button phone initiated a call
- Built-in serial port for connection to a PC running Talk-A-Lert (Model ETP-TAL)
- Stores real time and date for processing

ECO TOWER® Camera Arm
- ETP-MTE accessory
- Overhead camera mount
- added surveillance option
Talkaphone’s ETP-MTE-ARM is an overhead camera mount that gives users the ability to add a surveillance option to the award-winning ECO TOWER® emergency phone tower. Featuring the same lightweight aluminum construction for a reduced ecological footprint, the new video surveillance arm can be deployed on any of our basic ECO TOWER emergency phone towers.
- Lightweight aluminum construction for reduced ecological footprint and one-person installation
- Durable, multilayer powder coating achieves near-zero waste and VOC (volatile organic compound) emissions
- Vandal-resistant and designed to resist extreme weather conditions
- Fits a wide variety of fixed and pan-tilt-zoom (PTZ) video surveillance cameras (sold separately) with 1.5” NPT
- ETP-MTE accessory
- Overhead camera mount
- added surveillance option
Talkaphone’s ETP-MTE-ARM is an overhead camera mount that gives users the ability to add a surveillance option to the award-winning ECO TOWER® emergency phone tower. Featuring the same lightweight aluminum construction for a reduced ecological footprint, the new video surveillance arm can be deployed on any of our basic ECO TOWER emergency phone towers.
- Lightweight aluminum construction for reduced ecological footprint and one-person installation
- Durable, multilayer powder coating achieves near-zero waste and VOC (volatile organic compound) emissions
- Vandal-resistant and designed to resist extreme weather conditions
- Fits a wide variety of fixed and pan-tilt-zoom (PTZ) video surveillance cameras (sold separately) with 1.5” NPT

LED Blue Light (120VAC)
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency phone
Talkaphone’s ETP-EL is a 120VAC outdoor-rated LED blue light, which is continuously lit to draw attention to the location. The LED blue light flashes when activated by any Talkaphone series emergency phone or third party device that provides a dry contact closure or relay output.
- An ultra bright all-LED Blue Light is always lit. Flashing is activated on a dry contact closure.
- Polycarbonate refractor housing has prismatic pattern to increase visibility at greater distances
- All-LED construction of the unit significantly increases its life span
- Easily integrates with any Talkaphone emergency phone to flash for duration of a call
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency phone
Talkaphone’s ETP-EL is a 120VAC outdoor-rated LED blue light, which is continuously lit to draw attention to the location. The LED blue light flashes when activated by any Talkaphone series emergency phone or third party device that provides a dry contact closure or relay output.
- An ultra bright all-LED Blue Light is always lit. Flashing is activated on a dry contact closure.
- Polycarbonate refractor housing has prismatic pattern to increase visibility at greater distances
- All-LED construction of the unit significantly increases its life span
- Easily integrates with any Talkaphone emergency phone to flash for duration of a call

Parking Deck Mounting Kit
Designed for mounting Emergency Phone Towers into parking decks with pre-poured concrete.
Designed for mounting Emergency Phone Towers into parking decks with pre-poured concrete.

Parking Deck Mounting Kit
Designed for mounting Emergency Phone Towers into parking decks with pre-poured concrete.
Designed for mounting Emergency Phone Towers into parking decks with pre-poured concrete.

Wall Mount Pole Mounting Kit
Use the pole mounting kit, model ETP-PMKT-1, to strap a Talkaphone wall mount to a pole.
- Allows for easy, safe mounting to a horizontal or vertical post
- For indoor or outdoor use designed to accommodate a pole of up to 20" diameter
Use the pole mounting kit, model ETP-PMKT-1, to strap a Talkaphone wall mount to a pole.
- Allows for easy, safe mounting to a horizontal or vertical post
- For indoor or outdoor use designed to accommodate a pole of up to 20" diameter

Adapter for Mounting an ETP-110 / ETP-120 Series Call Station to a 400 Series Call Station Compatible Enclosure
Adapter for mounting an ETP-110 or ETP-120 Series Call Station to a 400 Series Call Station Compatible Enclosure. Not compatible with SM-110 surface mount.
Adapter for mounting an ETP-110 or ETP-120 Series Call Station to a 400 Series Call Station Compatible Enclosure. Not compatible with SM-110 surface mount.

Banding Tool for Pole Mounting Kits
- Model: ETP-PMKT-TOOL
- Pole mount strapping tool
- Can be used to strap Talkaphone’s wall mount units to a pole using 3/16” to 3/4″ wide general use band or strapping.
- Tensions over 2.400 lbs of force and cuts off the tail of the clap being formed
- Used to apply BAND-IT® Stainless Steel Band, BAND-FAST® Galvanized Carbon Steel Band, general use band, or miscellaneous strapping 3/16” to 3/4" wide
- Drop forged tool with built in cutter
- Spring loaded gripper lever improves ease of use
- Blue epoxy powder coated finish resists corrosive elements
- Model: ETP-PMKT-TOOL
- Pole mount strapping tool
- Can be used to strap Talkaphone’s wall mount units to a pole using 3/16” to 3/4″ wide general use band or strapping.
- Tensions over 2.400 lbs of force and cuts off the tail of the clap being formed
- Used to apply BAND-IT® Stainless Steel Band, BAND-FAST® Galvanized Carbon Steel Band, general use band, or miscellaneous strapping 3/16” to 3/4" wide
- Drop forged tool with built in cutter
- Spring loaded gripper lever improves ease of use
- Blue epoxy powder coated finish resists corrosive elements

Power Charging System (84 Ah)
Power Charging Systems allow emergency phone towers to be powered from a switched power supply.
- System will operate for 23.5 hours in standby and 0.5 hours in active operation
- A minimum charge time of 14 hours per day is required in winter and 8 hours per day in summer
- System must not drop below -22ºF in peak of winter or 50ºF in peak of summer
- Systems are designed to be connected to a power grid that is switched on at night year-round
Power Charging Systems allow emergency phone towers to be powered from a switched power supply.
- System will operate for 23.5 hours in standby and 0.5 hours in active operation
- A minimum charge time of 14 hours per day is required in winter and 8 hours per day in summer
- System must not drop below -22ºF in peak of winter or 50ºF in peak of summer
- Systems are designed to be connected to a power grid that is switched on at night year-round

Uninterruptible Power Supply (UPS) for the EC-8 Consolidator
The ETP-UPS is a back-up power supply designed for use with the EC-8 Consolidator
- Offers 10 hours of battery back-up for an EC-8 Consolidator
- Provides surge protection and noise filtering
- Tone indicates battery in use due to power failure
- Includes connection for additional surge protection
- Three output connections
The ETP-UPS is a back-up power supply designed for use with the EC-8 Consolidator
- Offers 10 hours of battery back-up for an EC-8 Consolidator
- Provides surge protection and noise filtering
- Tone indicates battery in use due to power failure
- Includes connection for additional surge protection
- Three output connections

22 Gauge, Solid, Three (3) Individually Shielded, Twisted Pair Cable with Overall Jacket
Cable for indoor or outdoor use with Talkaphone intercom systems
Cable for indoor or outdoor use with Talkaphone intercom systems

22 Gauge, Solid, Two (2) Individually Shielded, Twisted Pair Cable with Overall Jacket
Cable for indoor or outdoor use with Talkaphone intercom systems
Cable for indoor or outdoor use with Talkaphone intercom systems

22 Gauge, Solid, Twisted, Shielded Pair Cable
Cable for indoor or outdoor use with Talkaphone intercom systems
Cable for indoor or outdoor use with Talkaphone intercom systems

Blue Light Mounting Bracket for ETP-EL Series
- Mount in combination with Talkaphone emergency phone and blue light
- Use at university and college campuses, parking facilities, shopping malls, medical centers and transit facilities
- Allows for easy, safe mounting of LED Blue Light to wall, post, or electrical box
- For indoor or outdoor use
- Mount in combination with Talkaphone emergency phone and blue light
- Use at university and college campuses, parking facilities, shopping malls, medical centers and transit facilities
- Allows for easy, safe mounting of LED Blue Light to wall, post, or electrical box
- For indoor or outdoor use

LED Blue Light (12/24V)
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency phone
Talkaphone’s ETP-EL12/24 is a 12/24V outdoor-rated LED blue light, which is continuously lit to draw attention to the location. The LED blue light flashes when activated by any Talkaphone series emergency phone or third party device that provides a dry contact closure or relay output.
- An ultra bright all-LED Blue Light is always lit.
- Flashing is activated on a dry contact closure.
- Polycarbonate refractor housing has prismatic pattern to increase visibility at greater distances
- All-LED construction of the unit significantly increases its life span
- Easily integrates with any Talkaphone emergency phone to flash for duration of a call
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency phone
Talkaphone’s ETP-EL12/24 is a 12/24V outdoor-rated LED blue light, which is continuously lit to draw attention to the location. The LED blue light flashes when activated by any Talkaphone series emergency phone or third party device that provides a dry contact closure or relay output.
- An ultra bright all-LED Blue Light is always lit.
- Flashing is activated on a dry contact closure.
- Polycarbonate refractor housing has prismatic pattern to increase visibility at greater distances
- All-LED construction of the unit significantly increases its life span
- Easily integrates with any Talkaphone emergency phone to flash for duration of a call

Surface Mount Pole Mounting Kit
Use the pole mounting kit, model ETP-PMKT, to strap a Talkaphone surface mount or wall mount to a post.
- Allows for easy, safe mounting to a horizontal or vertical post
- For indoor or outdoor use
- Designed to accommodate a post of up to 12" diameter
Use the pole mounting kit, model ETP-PMKT, to strap a Talkaphone surface mount or wall mount to a post.
- Allows for easy, safe mounting to a horizontal or vertical post
- For indoor or outdoor use
- Designed to accommodate a post of up to 12" diameter

Power Supply (24VDC,1A)
Talkaphone's 86354 Power Supply (24VDC 1A) works with Talkaphone's VOIP-500 Series Emergency Phones, WEBS-CM-2 Communications Module, WEBS-PA-1 Indoor Area Paging Unit and ETP-EL12/24 LED Blue Light.
Talkaphone's 86354 Power Supply (24VDC 1A) works with Talkaphone's VOIP-500 Series Emergency Phones, WEBS-CM-2 Communications Module, WEBS-PA-1 Indoor Area Paging Unit and ETP-EL12/24 LED Blue Light.
You’ve viewed - of - products