ETP-520 Series Analog Call Station with

ETP-520CP

ETP-520 Series Analog Call Station with "CALL" Button/Signage and Handset

  •  G-style black-colored handset incorporates a noise-canceling microphone and a 20-inch armored cord
  • ADA-compliant "CALL" signage (raised letters and braille)
  • "CALL" button can auto-dial up to five (5) phone numbers.  If the first number does not answer or is busy, unit dials the second number.  If the second number does not answer or is busy, unit dials the third number—and so on.
  • Powered by and operates on a standard analog phone line or extension (no power supply required)
  • Two (2) LED indicators for hearing impaired (labeled "CALLING" and "ANSWERED")
  • Ability to identify the physical location of the call station through a pre-recorded voice message that plays at the beginning of a call
  • [NEW]  Line level output (600 Ohm) connects to an audio amplifier or paging system—providing the capability of receiving an audio page (mass notification) through a standard telephone call
  • Does not support inbound calls (no ringer)

ETP-520 Series outdoor-rated, ADA-compliant hands-free analog call stations go beyond emergency communications with a clean and simple interface constructed of 316 marine grade stainless steel.

Features and Benefits

  • G-style black-colored handset incorporates a noise-canceling microphone and a 20-inch armored cord
  • ADA-compliant "CALL" signage (raised letter and braille)
  • [NEW]  "CALL" button can auto-dial up to five (5) phone numbers.  If the first number does not answer or is busy, unit dials the second number.  If the second number does not answer or is busy, unit dials the third number—and so on.
  • Vandal resistant 316 marine grade stainless steel faceplate
  • Stainless steel metal button designed for long lasting usage and weather exposure
  • Two (2) LED indicators for hearing impaired (labeled "CALLING" and "ANSWERED")
  • Operates on regular phone lines for communication and function
  • Phone line powered—no power supply or battery backup required
  • Ability to identify the physical location of the call station through a pre-recorded voice message that plays at the beginning of a call
  • Available Auxiliary Input can be triggered by a momentary dry contact closure (e.g., vehicle detector) to auto-dial a list of phone numbers—order Model ETP- AUXIN-KIT-2 to enable feature
  • Two (2) Auxiliary Outputs can each provide a dry contact closure to devices such as a blue light beacon, access control panel, or security camera
  • [NEW]  Line level output (600 Ohm) connects to an audio amplifier or paging system—providing the capability of receiving an audio page (mass notification) through a standard telephone call
 

Downloads

ETP-520 Series Analog Call Station with

Related Products

Access Control Blue Light Phones
NEMA 4X Surface Mount with Door and Magnetic Switch

ETP-SMB-MS

NEMA 4X Surface Mount with Door and Magnetic Switch
Hooded Surface Mount for 500 Series and 600 Series Call Stations

ETP-SMH-1

Hooded Surface Mount for 500 Series and 600 Series Call Stations
Flush Mount Sleeve for 500 Series and 600 Series Call Stations

MS-600

Flush Mount Sleeve for 500 Series and 600 Series Call Stations