How to program ETP-100MBV Emergency Phone on PBX extension
Two minutes with a Talkaphone Tech: How to program an ETP-100MBV Emergency Phone on a PBX extension
Quick Programming
Call the Emergency Phone and enter the following codes.
After each entry, 1 beep = code accepted, 2 beeps = error, try again.
Guard Code: *4**
Emergency Button 1st phone number:
*13*[PHONE NUMBER TO CALL]*
Emergency Button 2nd phone number:
*23*[PHONE NUMBER TO CALL]*
PBX extension mode: *14*3*, *55*, *18*5*
Record Voice ID message: *58*, unit will beep after 10 seconds
Playback Voice ID message: *59*
Other Video Tutorials
| POTS Line | PBX Extension | |
| Single-Button
[EMERGENCY]
|
ETP-400, ETP-400V, ETP-100EB, ETP-100EBV, ETP-100MB, ETP-100MBV | ETP-400, ETP-400V, ETP-100EB, ETP-100EBV, ETP-100MB, ETP-100MBV |
| Single-Button
[TO CALL]
|
ETP-400C, ETP-400CV | ETP-400C, ETP-400CV |
| Two-Button | ETP-400D, ETP-400DV | ETP-400D, ETP-400DV |
| Keypad | ETP-400K, ETP-400KV | ETP-400K, ETP-400KV |
