Downloads
- Product Data SheetETP-EL1224_Cutsheet_Rev_1_3_10242011.pdf
- Product ManualETP-EL12-24_Manual_Rev_1_2_08262010.pdf
- Dimensional DrawingETP-EL_SERIES.DWG
LED Blue Light (12/24V)
Model Number: ETP-EL12/24
Talk-A-Phone’s ETP-EL12/24 is a 12/24V outdoor-rated LED Blue Light, which is continuously lit to draw attention to the location. The LED Blue Light flashes when activated by any Talk-A-Phone series emergency phone or third party device that provides a dry contact closure or relay output.
The ETP-EL12/24 has two settings controlled by an internal jumper: Normal Power Mode (NPM) and Low Power Mode (LPM). Low Power Mode is designed for applications where power consumption is an important consideration (e.g. when operating on solar power).
Talk-A-Phone’s ETP-EL LED Blue Light can be mounted to a wall using an ETP-MBKT mounting bracket. The unit is often used in combination with a Talk-A-Phone emergency phone at university and college campuses, parking facilities, shopping malls, medical centers, industrial campuses and transit facilities.
- An ultra bright all-LED Blue Light is always lit. Flashing is activated on a dry contact closure.
- Polycarbonate refractor housing has prismatic pattern to increase visibility at greater distances
- All-LED construction of the unit significantly increases its life span
- Easily integrates with any Talk-A-Phone emergency phone to flash for duration of a call
| Dimensions (H x Dia): | 6.9 x 6.6 in. (175 x 167 mm) |
| Weight: | 4 lbs. (1.8 kg) |
| Construction: | [Base/Dome] Polycarbonate [Gasket] UV-resistant EPDM Foam Rubber |
| Intensity: | 209 lumens peak (Normal Power Mode); reduced intensity in the Low Power Mode |
| Flash Rate: | 78 flashes per minute |
| LED life: | 70% of initial lumens after 50,000 hours of operation |
| Input Voltage: | 10-30VDC / 20-28VAC |
| Power Consumption: | 7.5 watts (Normal Power Mode) 1.5 watts (Low Power Mode) |
| Operating Temperature: | -40°F to 150°F (-40°C to 65°C) |
| Wiring: | 18GA jacketed power cable and 18GA twisted pair trigger wires; 180±6 in. long with tinned flying leads |
| Mounting: | Mount directly to a wall or using an ETP-MBKT mounting bracket kit |
| Compliance: | Conforms to UL Standard 1598 |
| Warranty: | 2-year warranty |
All Prices and Specifications Subject to Change Without Notice
